Products

ACOM 560 | CW Paddle

Application
The ACOM 560 CW Paddle makes using Radiotelegraphy and Morse code easy. The device can be used with an external keyer or with any modern transceiver with a built-in CW keyer.

Innovation and Quality
ACOM presents its breakthrough in telegraphy paddles with the introduction of the 560 model. The paddle is based on and manufactured using state‑of‑the‑art technologies, demonstrating ACOM's well-known innovative spirit and quality.

Advantages
Intelligent control with menu-driven functions. The ACOM 560 CW Paddle is controlled by a microcomputer with an LCD screen, as is common to ACOM products.
The ACOM 560 CW Paddle uses force (load cells) sensors to detect operator pressure on the levers. There are no moving parts inside the device that could cause mechanical problems. This guarantees the long life of your paddle.
The activating force can be adjusted from only 10 grams to 60 grams. No more health problems with your fingers and hands, which are usual when using mechanical CW devices.
Precision and sensitivity. With the refined operator pressure on the levers, you will have consistent and repeatable pressure registration for more accurate dot and dash generation. The activating force is freely defined for each lever individually and stored in 5 preset groups in the paddle's internal memory.
Silent telegraphy. The silence is what you dream of. And the ACOM 560 CW Paddle will give it to you, with its non-moving levers.

Easy to use
The ACOM 560 CW Paddle keying technique is the same as keying with a mechanical paddle, but now you will increase your maximum keying speed. The paddle weight of around 1 kg, combined with the anti-slip bottom pad, makes the device virtually stationary while keying, allowing you to enjoy your transmission.

No Service Needed
Since there are no mechanical moving parts, the ACOM 560 CW Paddle does not require the maintenance typical of mechanical devices.

Documentation
The User's Manual is available as a PDF file only. The latest version is available under the Download tab (see above).
ACOM creates and distributes its documentation in ENGLISH language only. If you need a User's Manual in your local language, please contact your dealer.

Warranty terms
The ACOM Terms of Business (General Conditions of Sale and General Service Conditions) are available as PDF files under the Support -> Terms of Business menu.
By purchasing ACOM products, the Customer (Dealer or End User) declares acceptance of the above-mentioned ACOM Terms of Business.

« Back

Electronics Design

The ACOM 560 CW Paddle is equipped with force (load cells) sensors to detect operator pressure on the levers and a microcomputer with a dialogue display;

Mechanical Design

Polished stainless steel base;
Anodized aluminum body;
Anodized colored aluminum levers;
Laser engraved symbols;
Anti-slip pad;
And every detail is in the proven ACOM style;

Connection to Transceiver or Keyer

Through a standard dia. 3.5 mm audio stereo socket (on the device's rear side);

Settings

Via a menu-driven interface on a graphic display;

The pressure force is freely defined for each lever and stored in 5 preset groups;

Levers Operational Modes

Dual Lever mode: The paddle works like a two-lever paddle;

Single Lever mode A: The paddle works like a single-lever paddle. When one sensor/lever (left or right) is activated, the other sensor/lever (right or left) is deactivated and cannot be used while the first one is in use. This simulates the classic behavior of a mechanical single-arm paddle.

Single Lever mode B: The paddle works like a single-lever paddle, but differently compared to Single A mode. In the event of simultaneous pressing of both levers, the sensor with the greater pressure is considered active. This allows more flexible control of the levers and dynamic switching between the two levers.

Lever Pressure Force

Operating: 10 - 60 g;

Maximum allowance: Up to 0,5 kg (500 g = 1.1. lbs.);

Force Sensors Calibrating

Fully automatic, menu-driven procedure;

Paddle Outputs

50 V max. / 10 mA max.;

Timers

Screen Off timer;

Energy-saver timer;

Power Supply

Through integrated Accu lithium-polymer battery (LP803040, 3.7 V, 1000 mAh);

Watt-hour rating: 3.7 Wh;

Battery charging through the device's USB-C port;

Battery full charging time: about 90 min;

Battery cycle life: about 500 times;

What Is In the Box

ACOM 560 CW Paddle;

2 sets of levers (standard and tall model)

Acu-battery (mounted into the paddle)

Connecting cable - shielded audio stereo cable with plugs (dia. 3.5 mm on paddle side and dia. 6.3 mm on the transceiver side), 1.5 m;

Calibrating weight, 60 g;

Hex (Allen) key for lever mounting;

Cleaning cloth;

Safety and Electromagnetic Compatibility

Complies with European Union's CE safety and electromagnetic compatibility requirements;

Size & Weight (excluding connected cables and with standard levers mounted)

WxDxH: 75x115x50 mm, 1.05 kg (3.0x4.5x2.0 inches, 2.3 lbs.).

Shipping Size & Weight

WxDxH: Approx. 290x270x190 mm, 2.0 kg (11.4x10.6x7.5 inches, 4.4 lbs.);

Please, contact us for shipment details;

Operating environments

Temperature range: 0 to +40 degrees Celsius (32 degrees F to 104 degrees F);

Relative air humidity: up to 95% @ +35 degrees Celsius (95 degrees F);

Height above sea level: up to 3050 m (10000 ft) without output deterioration.

« Back

There is one recommended individual purchase option available:

Coffee/tea mug :-)

1 | The ACOM coffee/tea mug is your amp's most important option.
This is the only guarantee for successful DXing and a happy life :-)

Other merchandising products

We offer many ACOM-branded superior merchandising products. We are sure you will like them.

« Back